Wolfmix

Using the "correct" profile does not automatically mean using a "working" profile"! Profiles coming from the fixture manufacturer, as they are the only ones who know what is going on DMX inside their fixtures! But they do not know what CONTROLLER a user is going to use. Ever...

Correct. Gigbar Move (non ILS) has 3Ch, 17Ch and 35Ch Gigbar Move ILS has also different Channel Modes between US and EU versions: US Rev 9-11 has 3Ch, 29Ch, 51Ch US Rev 3-8 has 3Ch, 28Ch and 50Ch EU Rev 3 has 3Ch, 30Ch, 52Ch You have to load the correct profile, matching to the multi fixture you ha...

Got it - you are unable to load the profile to even SELECT the channel mode from, as (a total of) 1.000+ (chs) make Wolfmix "choke" ( = not loading) giving: Error: Fixture Profile not added. Resync with WTOOLS to fix [OK] The "bad" part is that this profile is (officially) labell...

If you do NOT give an individual Preset a Color, then only the "global" 2 default Colors apply (for all "un-colored" Preset buttons) , which is "peach" for Toggle mode and "blue" for Flash mode

the change from toggle to flash was the ONLY variation of color you could have (from "peach" to "blue") on the older firmware. With the newer firmware you have much more colors now to select from when you want to change the color of the Preset button (regardless if it is toggle o...

you may want to enable the FLASH function on those Presets, which have been "blue-ish" instead of "peach" "Peach" indicates toggle function (On/Off), "Blue" is for "FLASH" functions (temporary) To get there you want to hold SHIFT and select the Prese...

sorry, my fault, overseen the wireless issue, thought it was a general malfunction of the RGBW Strobe fixture ...

You can do store Presets without active Colors. But you can NOT "stack up" Presets! So it won't help you to run one Preset and then "add" different Colors to it. Presets on Wolfmix are different and NOT just describing a Color or function and that being stored. A Preset - EVERY P...

misinterpreting the question - answer is not relevant to original question...

Are these fixtures exhibiting uncharacteristic behavior due to a firmware issue, or could there be another underlying cause for their erratic performance? Wolfmix is running perfect. Your fixture(s) most likely running perfect too. What is NOT optimized is the "glue" between the Wolfmix c...