Search found 334 matches
- Wed Mar 27, 2024 7:55 am
- Forum: Wolfmix Owners Forum
- Topic: Feature Request: Saving Presets without Colors
- Replies: 3
- Views: 47
Re: Feature Request: Saving Presets without Colors
You can do store Presets without active Colors. But you can NOT "stack up" Presets! So it won't help you to run one Preset and then "add" different Colors to it. Presets on Wolfmix are different and NOT just describing a Color or function and that being stored. A Preset - EVERY P...
- Wed Mar 27, 2024 7:44 am
- Forum: Wolfmix Owners Forum
- Topic: How to connect to CRMX Light
- Replies: 1
- Views: 15
Re: How to connect to CRMX Light
I can understand your confusion, as many things happen here simultaneous: 1. You have to understand how Strobe is (really) working 2. You have to understand how WOLFMIX is handling Strobe 3. You have to "interpret" the Multiflood manual correct 4. You have to make decisions and then have t...
- Tue Mar 26, 2024 5:01 pm
- Forum: Wolfmix Owners Forum
- Topic: Fixtures Behaving Badly.
- Replies: 2
- Views: 24
Re: Fixtures Behaving Badly.
Are these fixtures exhibiting uncharacteristic behavior due to a firmware issue, or could there be another underlying cause for their erratic performance? Wolfmix is running perfect. Your fixture(s) most likely running perfect too. What is NOT optimized is the "glue" between the Wolfmix c...
- Tue Mar 26, 2024 11:44 am
- Forum: Fixtures Behaving Badly
- Topic: Showtec octostrip mk2
- Replies: 4
- Views: 3293
Re: Showtec octostrip mk2
Shane to solve your problem with Octostrip, I would suggest the following: 1. decide what Channel Mode you want to use. Wolfmix has a max of 1.024 adresses (4 universes x 512Ch) - so that is your max limit. If you want to use 208Ch mode (100cm) or 206Ch (50cm) - then you can only connect up to 4 Bar...
- Tue Mar 26, 2024 9:09 am
- Forum: Fixtures Behaving Badly
- Topic: Showtec octostrip mk2
- Replies: 4
- Views: 3293
Re: Showtec octostrip mk2
You do not ADD the Modes for the max Channel counts, as you only load ONE Mode at a time - THIS then defines the channel count. But it is true that those fixtures with high multiple functions (12x Tilt, 12x Zoom, 12x RGBW) the profiles need special attention and they are not ready out-of-the-box to ...
- Tue Mar 26, 2024 8:02 am
- Forum: Wolfmix Owners Forum
- Topic: How configure RGBW inground in different zone...
- Replies: 1
- Views: 21
Re: How configure RGBW inground in different zone...
1. You have (and want) to have certain fixtures in different GROUPS (A;B;C;D....H), so you can put different Colors on 2. You even can apply 2 or more Colors on ONE GROUP of fixtures: In STATIC COLOR (NOT! ColorFX!!) - dial the Group rotary encoder from SINGLE to "ALTERNATE" (dot on/off/on...
- Fri Mar 22, 2024 3:15 pm
- Forum: Wolfmix Owners Forum
- Topic: Rename groups.....
- Replies: 2
- Views: 145
Re: Rename groups.....
Not the letters itself. But you can add a word or short description like Moving Heads or Floors and such. To do that: Select HOME / SETUP / GROUPS. Select the Group you want to edit (highlight orange) and then click on the "cursor/letter" icon in the upper right hand corner to open the Key...
- Fri Mar 15, 2024 9:17 pm
- Forum: Wolfmix Owners Forum
- Topic: ADJ ENTOUR FAZE MAchine
- Replies: 1
- Views: 488
Re: ADJ ENTOUR FAZE MAchine
The ADJ Entour Faze has 3 different Channel Modes: 1CH, 2 Ch and 4 Ch. You set the Entour Faze to the 2 Channel Mode. Then you load the attached profile, select Mode 2 (2Channel), where you have the 2 channels for control (Ch1 = Haze Output volume and Ch 2 = Fan speed). Once everything is loaded and...
- Thu Mar 07, 2024 5:46 pm
- Forum: Fixtures Behaving Badly
- Topic: ADJ Starburst Color Assignment
- Replies: 9
- Views: 10605
Re: ADJ Starburst Color Assignment
Do NOT use MoveFX for Rotation. Pan/Tilt movements are different to "steady" rotations. You will never get a steady rotation speed with Pan/Tilt (MoveFX). A Pan/Tilt movement is sending a continuous stream of positioning DMX data, let the Moving Head go up to down, from left to right sendi...
- Thu Mar 07, 2024 5:41 pm
- Forum: Fixtures Behaving Badly
- Topic: EUROLITE LED Mega Strobe 768 Bar
- Replies: 1
- Views: 827
Re: EUROLITE LED Mega Strobe 768 Bar
You most likely reaching a fixture type limit on Wolfmix by having too many segments.
There is a limit of 50 unique "profiles" within the Wolfmix project. When a fixture is split, each subsequent segment is then interpreted as a unique fixture/profile.
There is a limit of 50 unique "profiles" within the Wolfmix project. When a fixture is split, each subsequent segment is then interpreted as a unique fixture/profile.