Wolfmix

It is true what you say. Wolfmix was originally designed to give "dump" DMX lightings some effect capabilities. What we try to do however, is to attach "complex" (multi) Effect fixtures to (another) Effect Controller. Following is an excerpt of a text I did quite some time ago ab...

Thank you for the information. I have a lamp with two DMX channels. Channel 1 = dimmer, Channel 2 = color temperature. It does not work that I can dim this lamp in group A for example. Why is the dimmer channel not supported? Mathias I am not Nicolaudie Support (!), but maybe can try to explain the...

Prism "can" be stored as On/Off Live Edit Preset for individual On/Off switching. but you also can store it in a "regular" Preset, while Prism is being activated and running as part of a "regular" Preset. Then simply re-store the "regular" Preset with the curr...

probably - Yes! But without (official) manual stating exactly HOW DMX support is accomplished, I can only guess. As this is not a mass compatible RGB device but a bit "special", you have to create your own profile according to the DMX Manual specs and configure the "button" (func...

The profile is not optimized! There are many channels I would not configure as that. In particular - and THAT is probably the reason for "no movements", the SPEED Channel (Ch 3) is set (as default) to the sloooooooooooooooowest) value possible, 255, but it should be set to "0". O...

You can download the file like any other file from the internet to your computer. Just DOWNLOAD the file as is to your computer - there is no APP(!?) involved You THEN have to upload the file into your Nicolaudie Cloud Account (cloud.nicolaudiegroup.com) using Profile Builder and upper right hand co...

to make things easy is to use the correct channel mode profile with the correct channel fixture - or you will run into "shifted" DMX channels conflicts of fixtures sooner or later.
use the attached 8ch profile. (guess it will work according your DMX table posting).

For your IRIS effect (open/close) reassign the IRIS channel with ZOOM. Then you can use the "auto"-Zoom In/Out of Wolfmix instead. In BeamFX, press SIZE/FEATURE encoder, dial to ZOOM and activate BeamFX - voilá Auo"IRIS".

In POSITION Edit Mode (Position Picker) you only have one (1) Focus adjustment for every Position Preset, which is applying the same Focus value to all of your Moving Heads with a Focus channel. When your Moving Heads are different models or even different manufacturers, then the "single" ...

You may have to ask LaLuce for "Hopping" Mode but my guess is "Color Jump", compared to "Static Color" or Fade (Color) Mode". On Channel 6 is NOT part of the regular Wolfmix Automation, I would assume to be a "Speed" channel for the HOPPING (& FADE) M...