Wolfmix

Sorry, my fault ...you can't have multiple of the same beam numbers assigned in a single profile or they will "block" each other, showing a value of 127 (what you now see). You have to work with the 16 "blocks ( = 16 beams) and Wolfmix is correctly stepping thru it - no bug. Unfortuna...

in order to make a profile to "split" you need to assign "beams" to the "functional groups". These "beams have to be in strict SEQUENTIAL order (from 1 - to - 5 ...and not 1; 4; 2; 3; ..!) Also the profile does not allow channels with "multiple" beam assi...

HOLD & FADE times are being set, when you want to (auto-) PLAY Presets one after another by ROW or by COLUMN, by PAGE or ALL, according to the setting of the PAUSE/PLAY encoder in the Preset page. you give HOLD and FADE each a time - HOLD is how long the Preset will be "active / holded"...

This probably has been fixed in a newer version of the profile available from the Online Library. Delete the PARty TCL Spot profile from the Wolfmix, open WTOOLS on the computer and "sync" the new version to your Wolfmix. Channel 5 (Strobe) now has a default of 000 (being Off) You can also...

if you run it in SPLIT mode, you have already "individual" µFixtures as a "single instance". When SPLIT, you have separate Position entries you simply want to "move" - no need to FLIP. You need to have a fixture with multiple "beams" configured, then you can o...

To "FLIP" a Moving Head does not make any sense, as you only have ONE BEAM (one light source)! What do you expect to see when you change the order of this single light? You can "FLIP" a LED Bar with 18 LEDs, where you invert the "order". Imagine a "chase effect&quo...

If you MOVE fixtures to ANOTHER POSITION, this will change the "sequence" when the fixture in general will be affected by the FX. If you select FLIP, this will INVERT the BEAM ORDER inside of a fixture. Example: 3x LED Bars with 8 LEDs each: Position 1 - Bar 1 (LEDs 1-8) Position 2 - Bar 2...

If you activate SYNC, you enable a "beat bar sync" by entering the number of BARS how long the Preset stays active. If you want to use the HOLD & FADE settings in the Preset Edit, you want to switch OFF the "Sync" function.

Hold and Fade setting is now in EACH Preset (together with the "Sync" option). Hold SHIFT and select a Preset, entering Preset Edit. Here you can make your adjustments and also change the color of the Preset button. The "SYNC" button in the general Preset page is to overwrite all...

Re-order of the fixture can be accomplished in FIXTURE SETUP screen. Select your fixture and then dial the MOVE encoder to the position you want the fixture to be. At the same page on top of the screen you find the FIXTURE LIMIT (crosshair symbol), the Delete Fixture (trash bin) and the FLIP (moving...