Search found 381 matches

by axell
Fri Jun 21, 2024 1:08 pm
Forum: Wolfmix Owners Forum
Topic: Martin smartMAC
Replies: 1
Views: 16

Re: Martin smartMAC

Definitely not a question of age! 99,9% of the cases it is a question of the profile to be correct defined so Wolfmix can send the right data to the Moving Heads. As the smartMac is a bit "special" on Pan/Tilt channels, I would suspect Pan/Tilt Speed channel 11 (12ch mode) or channel 14 (1...
by axell
Thu Jun 20, 2024 1:34 pm
Forum: Wolfmix Owners Forum
Topic: Led bar with seperate white channel
Replies: 2
Views: 30

Re: Led bar with seperate white channel

Example: Create your own profile for 257Ch mode. Make it a "2 part profile" and divide in 2 "micro"-profiles, and load both next to each other to get the 257Ch count. pt1of2 = 64x RGB (beam 1-64) pt2of2 = 64x White (beam 1-64) + Frost (all beams) Now you load pt1of2 into Wolfmix ...
by axell
Thu Jun 20, 2024 11:57 am
Forum: Wolfmix Owners Forum
Topic: Error: to many channels
Replies: 2
Views: 27

Re: Error: to many channels

Before loading the profile on Wolfmix, open the Profile up into the (Cloud) Profile Builder and delete all those channel modes from the profile you are not planning to use. Make sure the total amount of Channels of the remaining Modes do NOT exceed 512 channels in total (even when distributed on dif...
by axell
Tue Jun 18, 2024 5:00 am
Forum: Wolfmix Owners Forum
Topic: Proper Fixture Ordering
Replies: 7
Views: 2678

Re: Proper Fixture Ordering

The order of the fixtures from within the patch window does directly affect the FX engine results. Every fixture from top to bottom is essentially given a number (this is known as an 'Index' number), so for example in a project with 8 fixtures you will have: (top of the list) Fixture 1 = Index 1 Fi...
by axell
Sun Jun 16, 2024 7:01 pm
Forum: Wolfmix Owners Forum
Topic: advise in wing / faderdesk
Replies: 6
Views: 557

Re: advise in wing / faderdesk

again, MIDI (i.e. using an AKAI APC mini as a controller) just controls GROUP DIMMERs (thru the APC faders) and regular PRESETS ( thru the APC buttons). With MIDI there is NO other DMX control possible.
by axell
Sat Jun 15, 2024 4:09 pm
Forum: Wolfmix Owners Forum
Topic: Scew holes at the bottom, what screws fit?
Replies: 1
Views: 126

Re: Scew holes at the bottom, what screws fit?

Looking at the specs at Wolfmix.com says:
* Powder-coated steel base plate with 100mm VESA (M4 6mm max)
by axell
Mon Jun 10, 2024 3:25 pm
Forum: Wolfmix Owners Forum
Topic: Control FX Speed with Midi
Replies: 1
Views: 169

Re: Control FX Speed with Midi

This is not possible with a MIDI controller and will be also not possible with any other EXTERNAL controller. All (effect) speed control options are available directly on the Wolfmix User Interface itself. Wolfmix is NOT a fully programmable DMX Controller! MIDI on Wolfmix ONLY(!) controls GROUP DIM...
by axell
Fri Jun 07, 2024 8:21 am
Forum: Wolfmix Owners Forum
Topic: Demo project with own fixtures
Replies: 6
Views: 4693

Re: Demo project with own fixtures

1. Save your Project (give it a name and save) 2. Go to HOME / SETUP / PROJECTS and select OPEN 3. Select the Demo Project - BUT DO NOT YET OPEN IT! (just SELECT) 4. Use the rotary encoder (PART) to dial to PRESETS 5. Use the rotary encoder (METHOD) to dial to APPEND 6. NOW select OPEN You now have ...
by axell
Thu Jun 06, 2024 1:09 pm
Forum: Wolfmix Owners Forum
Topic: advise in wing / faderdesk
Replies: 6
Views: 557

Re: advise in wing / faderdesk

Perhaps you are on the wrong page! Not exactly a good look when someone is ranting all over this place while having no clue what this is all about! I am a private user and NOT ..AND NEVER WAS .. a moderator of this Group. I do just answer questions here and try to help! This is my very private time ...
by axell
Tue Jun 04, 2024 1:34 pm
Forum: Wolfmix Owners Forum
Topic: advise in wing / faderdesk
Replies: 6
Views: 557

Re: advise in wing / faderdesk

Take DMX ! MIDI only is good for Group DIMMERS and Preset selection - currently there are no other MIDI assignments possible. With an external DMX Fader controller you can assign every channel of your project to a Fader and overwrite the Wolfmix "automation" with a Fader value. You have to...