Search found 356 matches
- Fri May 17, 2024 9:26 pm
- Forum: Wolfmix Owners Forum
- Topic: Where to FLIP the fixture order?
- Replies: 4
- Views: 13
Re: Where to FLIP the fixture order?
If you MOVE fixtures to ANOTHER POSITION, this will change the "sequence" when the fixture in general will be affected by the FX. If you select FLIP, this will INVERT the BEAM ORDER inside of a fixture. Example: 3x LED Bars with 8 LEDs each: Position 1 - Bar 1 (LEDs 1-8) Position 2 - Bar 2...
- Fri May 17, 2024 6:42 pm
- Forum: Wolfmix Owners Forum
- Topic: New "sync" and record option in the Preset page?
- Replies: 5
- Views: 2438
Re: New "sync" and record option in the Preset page?
If you activate SYNC, you enable a "beat bar sync" by entering the number of BARS how long the Preset stays active. If you want to use the HOLD & FADE settings in the Preset Edit, you want to switch OFF the "Sync" function.
- Fri May 17, 2024 6:39 pm
- Forum: Wolfmix Owners Forum
- Topic: Where ist the HOLD Option at the preset Page gone?
- Replies: 1
- Views: 10
Re: Where ist the HOLD Option at the preset Page gone?
Hold and Fade setting is now in EACH Preset (together with the "Sync" option. Hold SHIFT and select a Preset, entering Preset Edit. Here you can make your adjustments and also change the color of the Preset button. The "SYNC" button in the general Preset page is to overwrite all ...
- Fri May 17, 2024 6:35 pm
- Forum: Wolfmix Owners Forum
- Topic: Where to FLIP the fixture order?
- Replies: 4
- Views: 13
Re: Where to FLIP the fixture order?
Re-order of the fixture can be accomplished in FIXTURE SETUP screen. Select your fixture and then dial the MOVE encoder to the position you want the fixture to be. At the same page on top of the screen you find the FIXTURE LIMIT (crosshair symbol), the Delete Fixture (trash bin) and the FLIP (moving...
- Thu May 16, 2024 4:14 pm
- Forum: Wolfmix Owners Forum
- Topic: ADJ ENTOUR FAZE MAchine
- Replies: 3
- Views: 750
Re: ADJ ENTOUR FAZE MAchine
I double checked again and the attached Entour Faze profile (above) does work. Wolfmix supports 1Ch and 2Ch Fog/Hazer, so Mode 1 (1Ch) and Mode 2 (2Ch) of the profile do work with the Faze. Only the Mode 3 (4Ch) with additional Duration and Interval channels will work only with the help of Live Edit...
- Thu May 16, 2024 8:12 am
- Forum: Wolfmix Owners Forum
- Topic: Fixture calibration
- Replies: 1
- Views: 40
Re: Fixture calibration
Answering your question: No. (Wolfmix is working "by Groups" - so it is "all or nothing) replacing the Head is probably the best (and most efficient) fix! "Sometimes!!" you can "manually" set the Head with a little force to "flip over" a few teeth of the ...
- Fri May 10, 2024 4:58 pm
- Forum: Fixtures Behaving Badly
- Topic: ADJ Mega Par Profile Plus
- Replies: 1
- Views: 48
Re: ADJ Mega Par Profile Plus
At STATIC COLOR - look at the rotary encoder: It says: SINGLE. Just DIAL the rotary encoder 2 notches to the right and you get: ALTERNATE (dot on/off/on/off symbol). Now you should be able to select multiple Colors and distribute them evenly over your amount of fixtures assigned to that Group. (Ther...
- Thu May 09, 2024 7:21 am
- Forum: Wolfmix Owners Forum
- Topic: Fixtures with split beams (LINKED) don't go into the second universe
- Replies: 3
- Views: 1971
Re: Fixtures with split beams (LINKED) don't go into the second universe
There seem to be something "odd" with your project. 1. When you patch a "split" fixture, always the first entry should include the (given) Startaddress. the following "beams" entries are then represented as "Linked". So you should see the original DMX Startadd...
- Sat May 04, 2024 6:36 pm
- Forum: Fixtures Behaving Badly
- Topic: Chauvet Kinta HP
- Replies: 4
- Views: 165
Re: Chauvet Kinta HP
Its all about the right profile. Obviously you also have to "invalidate" other channels to avoid "blockings" against each other. I did send my profile to many users and they are all happy with it - so it does indeed work as proposed... You have to use the COLOR PICKER and EDIT ea...
- Fri May 03, 2024 5:15 pm
- Forum: Wolfmix Owners Forum
- Topic: 121 version
- Replies: 3
- Views: 350
Re: 121 version
There is no need, no However, your profile should have the right Channel Type configured, which you then assign by SHIFT (press rotary encoder) to select the function. The available Live Edit Macros (10) are: * Dimmer * Effect * Focus * Gobo Rotation * Gobo Rotation 2 * IRIS * Prism Rotation * Smoke...